Ryan
255 posts
Apr 03, 2010
6:11 PM
|
I just ordered some M2 nuts and bolts to get rid of the nails in my marine bands. I think I want to tap the reed plates, and I was wondering what size drill bit I will need to use in order to tap the reed plates for a M2 X .4mm size bolt. Thanks
Last Edited by on Apr 04, 2010 10:31 AM
|
DeakHarp
12 posts
Apr 04, 2010
9:58 AM
|
Im looking into adding that also to my custom Harps too ...where did you get the bolts?
|
pharpo
252 posts
Apr 04, 2010
11:34 AM
|
DeakHarp - here is the web address for an article from Kinya Pollard - lists all the parts and tools needed that can be ordered online at micro mart.
http://www.harmonicasessions.com/apr08/Pollard.html
Ryan...not sure If you are just drilling holes to fit the bolts..maybe a 1/16 bit ??...
That whole 4 part "comb over" series was very helpful to me...
Paul
----------
Music is your own experience, your own thoughts, your wisdom. If you don't live it, it won't come out of your horn. They teach you there's a boundary line to music. But, man, there's no boundary line to art. - Charlie Parker
|
Pimpinella
97 posts
Apr 04, 2010
12:03 PM
|
Hi
You need a M1.6 drill bit.
Here is a great site with information about nearly any type of thread you could encounter:
http://www.gewinde-normen.de/en/
|
