J.A.Harmonicas
6 posts
Apr 05, 2016
11:29 AM
|
Hello everyone,
From now on Im the maker of the Original Sjoeberg 3D milled MB & GM Custom combs. For you who are not familiar with the Sjoeberg combs, these combs give the harmonica an extra performance boost. They are 3D CNC milled with a very complex design. Aerodynamic formed slots with mirror wise progressive compression ridges that directs the airflow against the reeds. Easier bending, overblowing and a louder & crisper sound. They have a unique system with internal brass tube resonators which are reamed into place to ensure a perfect fit between the wood and the brass tube. The resonators combine the reed plates with each other and enhance the vibrations and overtones created in the harmonica. Each comb is lapped by hand on a lapping disk with tolerances down to 0,001mm to ensure a perfectly flat surface. They also have a glass like surface that is smooth against tongue and lips. To get the best performance with these combs I do recommend that you flat sand the draw reed plate.
For more information please go to my website,
http://jaharmonicas.com/Sjoeberg%20Combs.html
----------
Regards,
Joel Andersson
Sweden
Website
Facebook
YouTube
Last Edited by J.A.Harmonicas on Apr 05, 2016 11:29 AM
|
Diggsblues
2002 posts
Apr 05, 2016
12:48 PM
|
Sounds incredible !!!!
----------
|
J.A.Harmonicas
7 posts
Apr 08, 2016
4:08 PM
|
Thanks Diggsblues!
----------
Regards,
Joel Andersson
Sweden
Website
Facebook
YouTube
|
hvyj
3040 posts
Apr 17, 2016
12:57 PM
|
I have quite a few of the GM combs made by Dick Sjoeberg. I like them a lot. I'm delighted that this design is available again.
|
