Diggsblues
1978 posts
Mar 03, 2016
10:11 AM
|
Hohner has changed plate screws. I was wondering if the old brass GM plate screws will fit on the new GM plates.
Thanks in advance. ----------
|
harpwrench
1077 posts
Mar 03, 2016
7:11 PM
|
Yes except for the old GMs that had a different screw pattern and larger screws, 80's or early 90's maybe. ---------- www.spiersharmonicas.com Harp repair and upgrade menu
|
FreeWilly
479 posts
Mar 05, 2016
6:09 AM
|
Didn't that change happen a couple of years ago? I remember that during the transition I looked for the GM's with the silver screws, because the high harps with the brass screws would squeel like pigs on deep bends and overdraws.
Regarding the previous post, my confirmation is no longer required (but yes: they fit).
|
FreeWilly
480 posts
Mar 05, 2016
6:09 AM
|
Didn't that change happen a couple of years ago? I remember that during the transition I looked for the GM's with the silver screws, because the high harps with the brass screws would squeel like pigs on deep bends and overdraws.
Regarding the previous post, my confirmation is no longer required (but yes: they fit).
|